Product Details:
Payment & Shipping Terms:
|
Material: | PE | Adhesive Side: | Single Sided |
---|---|---|---|
Adhesive: | Rubber | Adhesive Type: | Pressure Sensitive |
Design Printing: | No Printing | Color: | Black |
Backing: | Polyethylene Basic Material | Thickness: | 15 Mils To 40 Mils |
Standard: | ASTM D 1000,en 12068,awwa C 214 | Similar: | Polyken,,ALtene |
Service Life: | More Than 30 Years | ||
High Light: | pipe coating tape,underground pipe tape |
pipe anti corrosion inner-layer tape for oil gas water
The inner-layer tape is a prefabricated tape consisting of a plastic backing of a polyethylene film and an adhesive layer of homogeneous elastomeric-sealant component laminated to the polyethylene film.
The finished material will provide high electrical resistivity, pliability and conformability, resistance to corrosive environments, low moisture absorption and permeability, ability to remain in place on the pipe during its normal service life, and shall provide an effective bond to the primed steel surface. It shall be such a nature as to resist fungi, bacteria, plant root, and also excessive mechanical damage during normal application operations.
The pipe anti corrosion inner-layer tape shall be sufficiently pliable for normal application operations and shall withstand, without tearing, the tensile force necessary to obtain a tightly wrapped inner coating free of voids.
Tape thickness |
20 mils (0.508 mm),25 mils (0.635 mm) 30mils(0.762mm) |
Tape color |
Black (BLK), White (WHI), Blue (BLU),GREEN(GRN) |
Tape width |
1" (25 mm), 2" (50 mm), 4" (101 mm), 6"(152 mm), |
Tape roll length |
100 ft (30 m) 200FT(60m),400FT(120m),600FT(180m) |
Tape core diameter |
1.5" (38 mm), 3" (75 mm) |
pipe anti corrosion inner-layer tape for oil gas water data sheet
Item&Standard |
T-150 |
T-165 |
T-175 |
Total thickness(ASTM D 1000) |
0.510 mm |
0.635 mm |
0.762 mm |
Backing thickness(ASTM D 1000) |
0.310 mm |
0.335 mm |
0.390 mm |
Adhesive thickness(ASTM D 1000) |
0.200 mm |
0.300 mm |
0.372 mm |
Elongation at Break(ASTM D 1000) |
( 400% |
||
Tensile Strength(ASTM D 1000) |
55 N/cm |
60 N/cm |
63 N/cm |
Yield Strength(ASTM D 1000) |
40 N/cm |
45 N/cm |
50 N/cm |
Peel Adhesion to Primed Steel Pipe(ASTM D 1000) |
22 N/cm |
28 N/cm |
30 N/cm |
Dielectric Strength(ASTM D 1000/D 149) |
35 KV |
42 KV |
45 KV |
Cathodic Disbandment (ASTM G8) |
0.24 in radius 6.4 mm |
||
Volume Resistivity(ASTM D 257) |
2.5 x 1012 ohm.m |
||
Water Vapor Transmission Rate (ASTM F1249) |
( 0.1gm/M2/24h |
||
Water Absorption Rate(ASTM D 570) |
< 0.10% |
||
Recommended Application Temperature |
-5 to +60℃ |
||
Max Serve Temperature |
-40 to + 85℃ |
||
Color |
Black |
||
Available Roll Size (width x length) |
2" to 32" X 50' to 800' |
Tape Coating Systems
Line travel, over-the-ditch coatings and application
Can be applied with a powered wrappers
Can be used for new pipeline construction
Can be used for pipeline rehabilitation/reconditionin
Used in the oil, gas and water pipeline industry
Offshore and Refinery coatings
Functionality to a Coating System
High adhesion strength
High shear resistance and shear strength
Cathodic disbonding resistance
Dielectric strength and electrical resistance
Resistance to impact and penetration forces and stresses
Stable to thermal and hydrolytic environments
Long term performance stability
Compatible with cathodic protection
Resistant to UV radiation
Mechanical protection
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than one full 20 ft container.
A: Low MOQ, 1pc for sample checking is available
A: We usually ship by TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
A: Firstly let us know your thickness or the total coating thickness
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.We can print your logo on the carton or the inner core.
A: Yes, we offer 1-3 years warranty to our products according to the different products
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less
than 0.2%.
Secondly, during the guarantee period, we can replace it with your new order together , but we have to get some proof to supply to our directorate
Contact Person: Ms. Daisy Kong
Tel: 86-15265879789
Fax: 86-537-2599926