Product Details:
Payment & Shipping Terms:
|
Material: | PE | Adhesive Side: | Single Sided |
---|---|---|---|
Adhesive: | Rubber, Butyl Rubber | Adhesive Type: | Pressure Sensitive |
Design Printing: | No Printing | Backing Film: | LDPE Or HDPE |
Tensile Strength: | More Than 35N/cm | Standard: | ASTM D 1000 |
Test Report: | SGS | ISO Certificate: | ISO 9001, ISO 14001,OHSMS 18001 |
Life Time: | More Than 30 Years | ||
High Light: | cold resistant tape,wrapping coating material |
pipeline inner wrap adhesive tape
1 System description:
The XUNDA-T 100 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines.
The pipeline inner wrap adhesive tape shall be applied after the Liquid adhesive and before the outer-layer tape by hand or with a wrapping machine
2 pipeline inner wrap adhesive tape Structure
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Film backing: Special blend of stabilized polyethylene
3 pipeline inner wrap adhesive tape Features:
Excellent adhesion to pipe and self
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
Cold applied
4 Physical Properties
Product properties | Test method | Typical Value | Typical Vale |
T164 | T264 | ||
Tensile Strength | ASTM D1000 | 52N/cm | 90N/cm |
Elongation | ASTM D1000 | >300% | >400% |
System Properties : T150+T276 | |||
Peel Adhesion to Primed Steel | ASTM D1000 | 30N/cm | |
Cathodic Disbondment | ASTM G8 | 6.4mm | |
Water Vapor Transmission Rate | ASTM F1249 | 0.2g/m2 | |
Water Absorptivity | ASTM D570 | 0.02% | |
Volume Resistivity | ASTM D257 | 2.5 X 1015 ohm·cm | |
Dielectric Strength | ASTM D149 | 26KV | |
Impact Resistance | ASTM G-14 | 5.5Nm | |
penetration resistance | ASTM G-17 | <15% | |
Temperature Range For Application For Service |
5℃ -50℃ -30℃ - 85℃ |
Anti-corrosion Tape T100 | Mechanical Protection Tape T200 | |||||||
T145 | T150 | T164 | T175 | T238 | T250 | T264 | T275 | |
Backing | 0.23mm | 0.25mm | 0.25mm | 0.35mm | 0.25mm | 0.38mm | 0.50mm | 0.64mm |
Adhesive | 0.22mm | 0.25mm | 0.39mm | 0.41m | 0.13mm | 0.12mm | 0.14mm | 0.12mm |
Tape thickness |
0.45mm,0.508mm,0.635mm,0.75mm or others | |||||||
Width | 50mm,100mm,150mm,225mm or others | |||||||
Length | 30m,60m,120m,180m or others | |||||||
Color | Black , Yellow ,White or others |
5.Application
Cleaning the pipe,and then brush the primer ,and then wrap the inner tape and outer tape with overlap 50% at least
Contact Person: Ms. Daisy Kong
Tel: 86-15265879789
Fax: 86-537-2599926