Payment & Shipping Terms:
|Material:||PE||Adhesive Side:||Single Sided|
|Adhesive:||Rubber||Adhesive Type:||Pressure Sensitive|
|Design Printing:||No Printing||Color:||Black,Gray|
|Adhesive Material:||Butyl Rubber||Film Material:||Polyethylene|
|Tensile Strength:||More Than 30 N/cm||Certificate:||SGS|
|Manger System:||ISO 9001,ISO 14001,OHSMS 18001||Standard:||ASTM D 1000,DIN 12068|
|Thickness:||0.8 Mm ,0.89 Mm,1.0 Mm,1.27 Mm||Application:||Field Joints Anti Corrosion|
waterproof tape for pipes,
pipe wrap insulation tape
T 300 T 600 Black or white joint wrap tape is Cold applied tape coating system for anti corrosion of field joints, fittings, and specifically pipeing. The adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing. it meet AWWA C209 standard, it is called pipe repair and joint wrapping tape
The pipe repair and joint wrap tape shall be applied by hand or with a wrapping machine.
2 Structure:-pipe repair and joint wrap tape
Backing: stabilized polyethylene
Adhesive: butyl rubber compound and adhesive synthetic resins
Interleaf: Anti Adhesive Siliconised film
3 Application for pipe repair and joint w rapping tape
Note: Various wide, length and thickness are available unique project requirement
If you need to know more details please visit our website: Http://www.pipelinewraptape.com
Industries that We Serve
Oil, Gas and Water Transmission pipeline market
Oil and Gas distribution and utility markets
New pipeline construction markets
Rehabilitation and Reconditioning market
Refinery and Petrochemical Plant Industry
Manufacture of Polyethylene coatings utilizing Butyl based elastomeric adhesives, Polyethylene films and liquid adhesives for corrosion protection of steel pipe.
Provides corrosion protection with the inherent chemistry of Polyethylene and Butyl Adhesive for resistance to water and oxygen penetration. Oxygen and Water are prevented from reaching the metal substrate, which are necessary and sufficient conditions for corrosion.
Manufacture of conventional and specialty Polyethylene, Polypropylene and Polymeric Alloys and coating systems for pipe corrosion protection.
Manufactures PE coatings systems for applications for New Pipe Construction and Rehabilitation and Reconditioning
Approved to ISO 9001 and to other good manufacturing and technical standards and norms governed within the energy and pipeline industry.
Coating systems that have a broad range of temperature and shear resistance properties to meet the requirements of the pipeline and end-user.
18 years of pipeline coating experience
Global presence in oil, gas and water industries
Total manufacturer of Polyethylene, Polypropylene coating systems
Innovative coatings, high temperature systems and niche coatings with first quality products
Multiple coating systems to meet end-user applications and requirements
Broad range of products to meet pipeline requirements
Tailor made products to specific application on demand by the end-user
High Quality products through innovative technology, manufacturing methodologies and first quality raw materials
ISO approved manufacturing protocol
Xunda products and coating systems approved to ASTMD1000,AWWA C 214,C 209,EN 12068,DIN 30672 and other standards
Standard manufacturing methodologies
State of the art quality control/assurance procedures and protocol
Technology/R&D programs for new products and new processes
Adaptable to manufacturing specific request within short time frames
Proven long-term performance and corrosion protection on operating pipelines
Coating applied in plant and over-the-ditch
Easy of application, consistent application and lower costs
Compatible with traditional and current corrosion coatings
Just-in-Time delivery on a global basis
Achieving and exceeding Client requirements for products, packaging and shipment expectations
Meetings all International and In-Country transportation requirements
Girth weld coating applied in Bell-hole or out of the ditch
Type of Products/ Services Offered
Anticorrosion and Mechanical Protection Tape-2ply & 3ply
Coatings for the joint
Tape Coating Systems
Line travel, over-the-ditch coatings and application
Can be applied with a powered wrappers
Can be used for new pipeline construction
Can be used for pipeline rehabilitation/reconditionin
Used in the oil, gas and water pipeline industry
Offshore and Refinery coatings
Functionality to a Coating System
High adhesion strength
High shear resistance and shear strength
Cathodic disbonding resistance
Dielectric strength and electrical resistance
Resistance to impact and penetration forces and stresses
Stable to thermal and hydrolytic environments
Long term performance stability
Compatible with cathodic protection
Resistant to UV radiation
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than one full 20 ft container.
A: Low MOQ, 1pc for sample checking is available
A: We usually ship by TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
A: Firstly let us know your thickness or the total coating thickness
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.We can print your logo on the carton or the inner core.
A: Yes, we offer 1-3 years warranty to our products.
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less
Secondly, during the guarantee period, we can replace it with your new order together , but we have to get some proof to supply to our directorate
Contact Person: Ms. Daisy Kong