Payment & Shipping Terms:
|Color:||Black Or Yellow||Backing:||Polyethylene|
|Adhesive:||Butyl Rubber Or Bitumen||Length:||15M,30M|
|Insulation:||35KV||Usage:||Pipeline Fitting,joints Anticorrosion|
|Same Brand:||Polyken 935,Altene|
waterproof tape for pipes,
anti corrosion tape
XUNDA-T-300 Bitumen Joint wrap tape
Bitumen tape Coating for Pipeline Joints & Fittings
Product System description:
T300 bitumen joint wrap tape tape series is designed for corrosion protection of straight pipes, fittings, flanges valves, bends, elbows, carbon steel pipes and other irregular configurations.bitumen wrap tape be made of a stabilized Polyethylene carrier film, coated on one sides with a permanently plastic synthetic compound on Butyl rubber compound bitumen adhesive.The unique bitumen adhesive retains conformability over a wide temperature range, yet exhibits an elevated level of shear resistance, which is a key in-ground performance characteristic.
The specification of the tape consists of three layers,
Adhesive: Butyl rubber Compound Bituminous Adhesion Promoting Resins
Film backing: Special blend of stabilized Polyethylene
Interleaf: Anti-adhesive Film Treated with Silicone (release paper)
Product Features & Benefits
Heavy duty adhesive.
Ensures a strong bond & impervious seal.
Conformable to irregular shapes.
Offers a solution for nearly every application.
No release liner.
Makes installation fast and easy.
Worldwide reference lists.
Established in-ground history.
Complies with AWWA Standard C-209.
Reliable, high-performance corrosion protection.
Retains conformability over a wide temperature range with an elevated level of shear resistance.
Product Selection Guide
Max operating temperature
|Additional mechanical layer|
T100 and T200 (955 or 954)
Compatible line coatings
PE, FBE, Tape & Coal Tar
|Product Properties||Test method||Typical Value|
|Tensile Strength||ASTM D1000||15 lbs/in|
|Peel Adhesion to Primed Steel||ASTM D1000||225 oz/in|
|Cathodic Disbondment:||ASTM G8||0.25 in radius (6.4 mm)|
|Water Vapor transmission||ASTM E96B||<0.1%|
|Water Vapor Transmission Rate||ASTM F1249 (100°F, 100% RH)||0.04 g / 100 in2 / 24hr|
(0.6 g/m2 / 24 hr)
|Volume Resistivity||ASTM E257||2.5 x 1016 ohm-cm|
|Dielectric Breakdown||ASTM D1000||650 volts/mil|
( 23.6 kV/mr)
( 23.6 kV/mr)
|Dielectric Strength||ASTM D149||21 kV||28 kV||30 kV|
|Insulation resistance||ASTM D1000||1.4 x 107 MOhm||2.0 x 107 MOhm||2.0 x 107 MOhm|
|Impact resistance||EN12068||> 8 Nm|
Tape Coatings are available in roll form.
Ordering Example: T300-35 BLK 2X50FT 3’’
35 mils (0.89 mm), 50 mils (1.27 mm)
Black (BLK), White (WHI), Blue (BLU)
1" (25 mm), 2" (50 mm), 4" (101 mm),6"(152 mm),
Tape roll length in feet
Tape inner core diameter in inches
1.5" (38 mm), 3" (75 mm)
Contact Person: Ms. Daisy Kong