Payment & Shipping Terms:
|Type:||Waterproof Membrane||Width:||2'',3'',4'',6'',8'',10'' 40''|
|Color:||Sliver,gray,black,dark Blue,dark Red||Thickness:||1.0mm,1.5mm,2.0mm|
|Length:||10 M||Package:||Independent Packing|
aluminum roofing tape,
roof flashing tape
Black aluminium foil tape
- High quality, self adhesive flashing tape, for general repairs and sealing. A lead coloured, crease resistant flashing tape covered with heavy duty aluminium foil and a high grade bitumen backing - bonds instantly to provide a permanent watertight seal in all climates.
Black aluminium foil tape may be used to flash over Felted, Mastic-asphalt and other Bituminous roofs; Asbestos-cement, Concrete, Stone-flag, Terracotta Tile or Slate roofs; Aluminum sheet, Glass, Rigid-Plastics, Epoxy-coated sheet and Galvanized sheet roofs;
Black aluminium foil tape can be flash to Parapet walls, Chimney stacks, Window-kerbs, Upstands & can be used for soakers and joints between brickwork and timber studding prior to tile or slate hanging.
Black aluminium foil tape can flash round projections through roofs (cold pipes, roof lights, extractor vents), and as a protective wrapping of insulation covered pipes and tanks. Leaks in drain-pipes and gutters can also be repaired.
Black aluminium foil tape may be used to repair lead flashings, felt roofs, cracked roof tiles or slates, cement fibre corrugated sheets, and asbestos cement sheets (sealing in any asbestos fibre!). Valley gutters can also be sealed.
Black aluminium foil tape seals glazing bars and roof lights in greenhouses, conservatories, and roof-lights.
Clean all surfaces to remove grease or loose debris. If the surface is porous or has a rough or uneven profile, apply PRIMER before fixing the flashing strip. Flashband is easily applied using hand pressure only, but sometimes a small roller can help to give a more even finish, and "roll out" air pockets.
|Product Properties||Typical Value|
|Breaking Strength||>50N /cm|
|Adhesion Strength||>30 N/cm|
|Adhesion to||Metal , Concrete, Brick, Slate, Tile, Painted Wood, and Rigid Plastics|
|Drop Down at 85℃||No dripping|
|Flexibility at -20℃||Excellent|
|Water Vapor Transmission Rate||0.2g/m2|
-30℃ - 85℃
Contact Person: Ms. Daisy Kong