Product Details:
Payment & Shipping Terms:
|
| Color: | White | Backing Layer: | Polyethylene (PE) |
|---|---|---|---|
| Adhesive Layer: | Butyl Rubber | Usage: | Pipeline Corrosion Protection |
| Width: | 50mm,100mm,150mm,200mm | Length: | 30M,60M,120m |
| Elongation: | 600% | Adhesive Strength: | 7N |
| Impact Strengh: | 15J | Same Brand: | Polyken,Altene, |
| High Light: | butyl rubber sealing tape,corrosion protection tape |
||
Polyken 955 mechanical protection outer wrap tape for steel pipeline
System description:
Outer wrap tape also be called outer layer protection tape, pipe wrap tape, polyethylene adhesive tape.
Outer wrap tape T200 is engineered to achieve a complete bond to the inner layer tape, providing maximum handling and in-service protection for the coating system.
Outer wrap tape T200 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water pipeline. Pipe can be buried, underground ,overhead ,onshore and offshore.
Structure:
The specification of the tape consists of two layers, adhesive layer and film backing.
Adhesive: Butyl rubber
Film backing: Special blend of stabilized polyethylene
Features & Benefits
Excellent adhesion to inner-layer tape and self
long term corrosion protection , Resistant to UV
Worldwide reference lists. Established in-ground history
High chemical resistance under service temperature.
Outstanding electric property and permanent adhesion.
Cold applied, No release liner. Makes installation fast and easy.
Complies with EN-DIN 30672 and AWWAC-214 international standards and also ASTM standards.
Physical Properties:
| Product properties | Test method | Typical Value | Typical Vale |
| T164 | T264 | ||
| Tensile Strength | ASTM D1000 | 52N/cm | 90N/cm |
| Elongation | ASTM D1000 | >300% | >400% |
| System Properties : T150+T276 | |||
| Peel Adhesion to Primed Steel | ASTM D1000 | 30N/cm | |
| Cathodic Disbondment | ASTM G8 | 6.4mm | |
| Water Vapor Transmission Rate | ASTM F1249 | 0.2g/m2 | |
| Water Absorptivity | ASTM D570 | 0.02% | |
| Volume Resistivity | ASTM D257 | 2.5 Ｘ 1015 ohm·cm | |
| Dielectric Strength | ASTM D149 | 26KV | |
| Impact Resistance | ASTM G-14 | 5.5Nm | |
| penetration resistance | ASTM G-17 | <15% | |
|
Temperature Range For Application For Service |
5℃ -50℃ -30℃ - 85℃ |
||
Product Selection Guide
|
Max operating temperature |
66°C (150°F) |
|
Recommended primer |
P19 |
|
Additional mechanical layer |
T100 and T200 |
|
Compatible line coatings |
PE, FBE, Tape & Coal Tar |
|
Recommended pipe preparation |
SSPC-SP2, SP3 & SP6 ST 2 1/2 - ST 3 |
Ordering Information
Tape Coatings are available in roll form.Ordering Example: T200-25 WHT6X200FT 3’’
| 25 | Total tape thickness in mils | 20 mils (0.508 mm),25 mils (0.635 mm) |
| WHT | Tape backing color | Black (BLK), White (WHI), Blue (BLU),GREEN(GRN) |
| 6 | Tape width in inches | 1" (25 mm), 2" (50 mm), 4" (101 mm), 6"(152 mm), |
| 200FT | Tape roll length in feet | 100 ft (30 m) 200FT(60m),400FT(120m),600FT(180m) |
| 3 | Tape inner core diameter | 1.5" (38 mm), 3" (75 mm) |
Contact Person: Ms. Daisy Kong
Tel: 86-15265879789
Fax: 86-537-2599926
