Product Details:
Payment & Shipping Terms:
|
Materials: | PE | Adhesive: | Butyl Rubber Adhesive |
---|---|---|---|
Width: | 50mm,100mm,150mm | Thickness: | 0.5mm,0.64mm,0.76mm,0.89mm |
Length: | 30M,60M,120M,180M | Elongation: | 400% Min |
Strength: | 55N-95N | Adhesion: | 30N/cm |
Usage: | Steel Pipe Corrosion Protection | Same Brand: | Polyken,Altene, |
Color: | Black | Standard: | AWWAC214,ASTM,EN12068 |
High Light: | wrapping coating material,cold tape wrapping |
Pipe anticorrosion materials outer/inner/joint tape
System Description
The Xunda gas pipe wrapping tape T100 and T200 is a multilayer system used for the corrosion protection of oil ,gas ,and water steel pipeline. T100 &T200 consist of two layers, the butyl rubber adhesive laminated on the polyethylene film backing. The T100 can be used as inner tape, T200 can be used as outer tape.
Xunda liquid adhesive can be used as primer for this system. The liquid adhesive represent an anti-corrosion layer and provide a uniformly smooth contact surface to promote high adhesion of the coating system to the pipe.
The gas pipeline wrapping tape assures a high bond to the primed surface with excellent conformability. The mechanical protection tape achieves a complete bond to the anti-corrosion tape.
The system can be applied by hand or with a wrapping machine.
System Features
|
|
|
|
|
|
|
|
|
System Properties
Anti-corrosion Tape T100 | Mechanical Protection Tape T200 | |||||||
T138 | T150 | T164 | T175 | T238 | T250 | T264 | T275 | |
Backing | 0.18mm | 0.25mm | 0.25mm | 0.35mm | 0.25mm | 0.38mm | 0.50mm | 0.64mm |
Adhesive | 0.20mm | 0.25mm | 0.39mm | 0.41m | 0.13mm | 0.12mm | 0.14mm | 0.12mm |
Tape thickness |
0.5mm,0.508mm,0.635mm,0.75mm or others | |||||||
Width | 50mm,100mm,150mm,225mm or others | |||||||
Length | 30m,60m,120m,180m or others | |||||||
Color | Black , Yellow ,White or others |
Product properties | Test method | Typical Value | Typical Vale |
T164 | T264 | ||
Tensile Strength | ASTM D1000 | 52N/cm | 90N/cm |
Elongation | ASTM D1000 | >300% | >400% |
T165+T265 | |||
Peel Adhesion to Primed Steel | ASTM D1000 | 30N/cm | |
Cathodic Disbondment | ASTM G8 | 6.4mm | |
Water Vapor Transmission Rate | ASTM F1249 | 0.2g/m2 | |
Water Absorptivity | ASTM D570 | 0.02% | |
Volume Resistivity | ASTM D257 | 2.5 X 1015 ohm·cm | |
Dielectric Strength | ASTM D149 | 26KV | |
Impact Resistance | ASTM G-14 | 5.5Nm | |
penetration resistance | ASTM G-17 | <15% | |
Temperature Range For Application For Service |
5℃ -50℃ -30℃ - 85℃ |
Contact Person: Ms. Daisy Kong
Tel: 86-15265879789
Fax: 86-537-2599926