Product Details:
Payment & Shipping Terms:
|
Color: | Black Or Yellow | Backing: | Polyethylene |
---|---|---|---|
Adhesive: | Butyl Rubber Or Bitumen | Length: | 15M,30M |
Width: | 50mm,100mm,150mm | Thickness: | 0.89mm,1.0mm,1.2mm,1.5mm,1.65mm |
Elongation: | 600% | Strength: | 90N |
Insulation: | 35KV | Usage: | Pipeline Fitting,joints Anticorrosion |
Same Brand: | Polyken 935,Altene | ||
High Light: | butyl rubber sealing tape,self adhesive rubber tape |
XUNDA-T-300 Pipe Joint wrap tape
Tape Coating for Pipeline Joints & Fittings&special piping
Product System description:
polyken 930-50 930-35 Joint wrap tape tape series is designed for corrosion protection of straight pipes, fittings, flanges valves, bends, elbows, carbon steel pipes and other irregular configurations.T300 wrap tape be made of a stabilized Polyethylene carrier film, coated on one sides with a permanently plastic synthetic compound on Butyl rubber compound base.The unique adhesive retains conformability over a wide temperature range, yet exhibits an elevated level of shear resistance, which is a key in-ground performance characteristic.
Product Structure
The specification of the tape consists of three layers,
Adhesive: Butyl rubber Compound Bituminous Adhesion Promoting Resins
Film backing: Special blend of stabilized Polyethylene
Interleaf: Anti-adhesive Film Treated with Silicone (release paper)
Product Features & Benefits
Heavy duty adhesive.
Ensures a strong bond & impervious seal.
Conformable to irregular shapes.
Offers a solution for nearly every application.
No release liner.
Makes installation fast and easy.
Worldwide reference lists.
Established in-ground history.
Complies with AWWA Standard C-209.
Reliable, high-performance corrosion protection.
Retains conformability over a wide temperature range with an elevated level of shear resistance.
Product Selection Guide
Max operating temperature | 66°C (150°F) |
Recommended primer | P27 |
Additional mechanical layer | T100 and T200 (955 or 954) |
Compatible line coatings | PE, FBE, Tape & Coal Tar |
Product Properties
Product Properties | Test method | Typical Value #300-35 | Typical Value #300-50 | Typical Value #300-65 |
Tensile Strength | ASTM D1000 | 15 lbs/in (26 N/cm) | 25 lbs/in (44 N/cm) | 35 lbs/in (60 N/cm) |
Elongation | ASTM D1000 | 150% | ||
Peel Adhesion to Primed Steel | ASTM D1000 | 225 oz/in (25 N/cm) | 300 oz/in (33 N/cm) | 300 oz/in (33 N/cm) |
Cathodic Disbondment: | ASTM G8 | 0.25 in radius (6.4 mm) | ||
Water Vapor transmission | ASTM E96B | <0.1% | ||
Water Vapor Transmission Rate | ASTM F1249 (100°F, 100% RH) | 0.04 g / 100 in2 / 24hr (0.6 g/m2 / 24 hr) | ||
Volume Resistivity | ASTM E257 | 2.5 x 1016 ohm-cm | ||
Dielectric Breakdown | ASTM D1000 | 650 volts/mil (25.6 kV/mm) | 600 volts/mil ( 23.6 kV/mr) | 600 volts/mil ( 23.6 kV/mr) |
Dielectric Strength | ASTM D149 | 21 kV | 28 kV | 30 kV |
Insulation resistance | ASTM D1000 | 1.4 x 107 MOhm | 2.0 x 107 MOhm | 2.0 x 107 MOhm |
Impact resistance | EN12068 | > 8 Nm |
Ordering Information
Tape Coatings are available in roll form.
Ordering Example: T300-35 BLK 2X50FT 3’’
25 | Tape thickness | 35 mils (0.89 mm), 50 mils (1.27 mm) |
BLK | Tape color | Black (BLK), White (WHI), Blue (BLU) |
2'' | Tape width | 1" (25 mm), 2" (50 mm), 4" (101 mm),6"(152 mm), |
100 | Tape roll length in feet | 100ft,50ft |
3'' | Tape inner core diameter in inches | 1.5" (38 mm), 3" (75 mm) |
Contact Person: Ms. Daisy Kong
Tel: 86-15265879789
Fax: 86-537-2599926