Product Details:
Payment & Shipping Terms:
|
Material: | PE | Adhesive Side: | Single Sided |
---|---|---|---|
Adhesive: | Rubber | Adhesive Type: | Hot Melt, Pressure Sensitive |
Design Printing: | No Printing | Color: | BLACK |
Usage: | CORROSION Protection For Oil Gas Water Pipes | Thickness: | 25 Mils |
Width: | 50 Mm To 800 Mm | Length: | 100 Ft To 1000 Ft |
Keywords: | Inner Wrapping Tape, Polyken Tape | Certificates: | ISO 9001,ISO 14001,OHSAS 18001 |
Third Party Test Report: | SGS,EXOVA | ||
High Light: | butyl rubber sealing tape,corrosion protection tape |
980 Inner-layer tape T100 is engineered to achieve a complete bond to the primed steel pipe, providing maximum handling and in-service anti corrosion protection for the coating system.
Product Type:
|
Roll
|
Material:
|
HDPE/LDPE +butyl rubber
|
Color:
|
Black,Yellow
|
Adhesion strength:
|
more than 25 N/cm
|
Elongation:
|
more than 200%
|
Tensile strength:
|
more than 50N/cm
|
Whole coating system:
|
Primer P 27+980 inner layer tape +955 outer layer tape
|
Main standard
|
AWWA C 214,ASTM D 1000,EN 12068
|
Product properties | Test method | Typical Value | Typical Vale |
T164 | T264 | ||
Tensile Strength | ASTM D1000 | 52N/cm | 90N/cm |
Elongation | ASTM D1000 | >300% | >400% |
System Properties : T150+T276 | |||
Peel Adhesion to Primed Steel | ASTM D1000 | 30N/cm | |
Cathodic Disbondment | ASTM G8 | 6.4mm | |
Water Vapor Transmission Rate | ASTM F1249 | 0.2g/m2 | |
Water Absorptivity | ASTM D570 | 0.02% | |
Volume Resistivity | ASTM D257 | 2.5 X 1015 ohm·cm | |
Dielectric Strength | ASTM D149 | 26KV | |
Impact Resistance | ASTM G-14 | 5.5Nm | |
penetration resistance | ASTM G-17 | <15% | |
Temperature Range For Application For Service |
5℃ -50℃ -30℃ - 85℃ |
1)The inner-layer tape shall be applied directly onto the prepared pipe surface,
Wrap tape application consists of hand application and machine application.
2)The tape applied temperature must be above 5 degrees, the coating construction temperature shall be
more than -5 degrees as better.
3)The tape shall be spirally applied ,minimum overlap shall not be less than 50%.When applied to
spirally welded pipe , the direction of the tape spiral shall be generally parallel to the weld spiral.
The minimum overlap shall not be less than 25 mm.
4)When a new row of tape is started, the ends shall be overlapped at least 150 mm measured circumference.
Xunda Coating system is always made up of Primer, inner wrap tape and outer wrap tape or primer and Bitumen tape system. Our Primer+inner wrap tape +outer wrap tape coating system is very popular in Many government oil , gas ,water company, such as MEDCO of Indonesia,BGSL,TITAS,JALALABAD OF Bangladesh,CPGCL ,OGDCL of Pakistan and so on, Our Primer +bitumen tape coating system is very popular in Ukraine state Gas company(UkraineTransgas) , Australia, Yemen and so on.
Xunda will continue to develop corrosion prevention, waterproof and sealing solutions for the protection of client's valuable infrastructural assets around the world, ensuring our clients derive maximum benefit from our solutions. fulfilling all market requirements for a performance guarantee against corrosion , whilst ensuring respect for the environment and applicator.
• Pursuing world leadership for innovative, cost-effective, and environmentally corrosion prevention , waterproof and sealing solution
Contact Person: Ms. Daisy Kong
Tel: 86-15265879789
Fax: 86-537-2599926