Product Details:
Payment & Shipping Terms:
|
| Material: | PE | Adhesive Side: | Single Sided |
|---|---|---|---|
| Adhesive: | Rubber | Adhesive Type: | Pressure Sensitive |
| Design Printing: | No Printing | Color: | Black |
| Backing: | Polyethylene Basic Material | Thickness: | 15 Mils To 40 Mils |
| Standard: | ASTM D 1000,en 12068,awwa C 214 | Similar: | Polyken,,ALtene |
| Service Life: | More Than 30 Years | ||
| High Light: | pipe wrap insulation tape,anti corrosion tape |
||
pipe anti corrosion inner-layer tape for oil gas water
The inner-layer tape is a prefabricated tape consisting of a plastic backing of a polyethylene film and an adhesive layer of homogeneous elastomeric-sealant component laminated to the polyethylene film.
The finished material will provide high electrical resistivity, pliability and conformability, resistance to corrosive environments, low moisture absorption and permeability, ability to remain in place on the pipe during its normal service life, and shall provide an effective bond to the primed steel surface. It shall be such a nature as to resist fungi, bacteria, plant root, and also excessive mechanical damage during normal application operations.
The pipe anti corrosion inner-layer tape shall be sufficiently pliable for normal application operations and shall withstand, without tearing, the tensile force necessary to obtain a tightly wrapped inner coating free of voids.
|
Tape thickness |
20 mils (0.508 mm),25 mils (0.635 mm) 30mils(0.762mm) |
|
Tape color |
Black (BLK), White (WHI), Blue (BLU),GREEN(GRN) |
|
Tape width |
1" (25 mm), 2" (50 mm), 4" (101 mm), 6"(152 mm), |
|
Tape roll length |
100 ft (30 m) 200FT(60m),400FT(120m),600FT(180m) |
|
Tape core diameter |
1.5" (38 mm), 3" (75 mm) |
pipe anti corrosion inner-layer tape for oil gas water data sheet
|
Item&Standard |
T-150 |
T-165 |
T-175 |
|
Total thickness(ASTM D 1000) |
0.510 mm |
0.635 mm |
0.762 mm |
|
Backing thickness(ASTM D 1000) |
0.310 mm |
0.335 mm |
0.390 mm |
|
Adhesive thickness(ASTM D 1000) |
0.200 mm |
0.300 mm |
0.372 mm |
|
Elongation at Break(ASTM D 1000) |
( 400% |
||
|
Tensile Strength(ASTM D 1000) |
55 N/cm |
60 N/cm |
63 N/cm |
|
Yield Strength(ASTM D 1000) |
40 N/cm |
45 N/cm |
50 N/cm |
|
Peel Adhesion to Primed Steel Pipe(ASTM D 1000) |
22 N/cm |
28 N/cm |
30 N/cm |
|
Dielectric Strength(ASTM D 1000/D 149) |
35 KV |
42 KV |
45 KV |
|
Cathodic Disbandment (ASTM G8) |
0.24 in radius 6.4 mm |
||
|
Volume Resistivity(ASTM D 257) |
2.5 x 1012 ohm.m |
||
|
Water Vapor Transmission Rate (ASTM F1249) |
( 0.1gm/M2/24h |
||
|
Water Absorption Rate(ASTM D 570) |
< 0.10% |
||
|
Recommended Application Temperature |
-5 to +60℃ |
||
|
Max Serve Temperature |
-40 to + 85℃ |
||
|
Color |
Black |
||
|
Available Roll Size (width x length) |
2" to 32" X 50' to 800' |
||
Industries that We Serve
Oil, Gas and Water Transmission pipeline market
Oil and Gas distribution and utility markets
New pipeline construction markets
Rehabilitation and Reconditioning market
Offshore Industry
Refinery and Petrochemical Plant Industry
Manufacture of Polyethylene coatings utilizing Butyl based elastomeric adhesives, Polyethylene films and liquid adhesives for corrosion protection of steel pipe.
Provides corrosion protection with the inherent chemistry of Polyethylene and Butyl Adhesive for resistance to water and oxygen penetration. Oxygen and Water are prevented from reaching the metal substrate, which are necessary and sufficient conditions for corrosion.
Manufacture of conventional and specialty Polyethylene, Polypropylene and Polymeric Alloys and coating systems for pipe corrosion protection.
Manufactures PE coatings systems for applications for New Pipe Construction and Rehabilitation and Reconditioning
Approved to ISO 9001 and to other good manufacturing and technical standards and norms governed within the energy and pipeline industry.
Coating systems that have a broad range of temperature and shear resistance properties to meet the requirements of the pipeline and end-user.
Key Advantages
18 years of pipeline coating experience
Global presence in oil, gas and water industries
Total manufacturer of Polyethylene, Polypropylene coating systems
Innovative coatings, high temperature systems and niche coatings with first quality products
Multiple coating systems to meet end-user applications and requirements
Broad range of products to meet pipeline requirements
Tailor made products to specific application on demand by the end-user
High Quality products through innovative technology, manufacturing methodologies and first quality raw materials
ISO approved manufacturing protocol
Xunda products and coating systems approved to ASTMD1000,AWWA C 214,C 209,EN 12068,DIN 30672 and other standards
Standard manufacturing methodologies
State of the art quality control/assurance procedures and protocol
Technology/R&D programs for new products and new processes
Adaptable to manufacturing specific request within short time frames
Proven long-term performance and corrosion protection on operating pipelines
Coating applied in plant and over-the-ditch
Easy of application, consistent application and lower costs
Compatible with traditional and current corrosion coatings
Technical support
Just-in-Time delivery on a global basis
Achieving and exceeding Client requirements for products, packaging and shipment expectations
Meetings all International and In-Country transportation requirements
Girth weld coating applied in Bell-hole or out of the ditch
Type of Products/ Services Offered
Anticorrosion and Mechanical Protection Tape-2ply & 3ply
Primers
Fillers
Wrapping Machines
Technical Assistance
Coatings for the joint
Special products
Tape Coating Systems
Line travel, over-the-ditch coatings and application
Can be applied with a powered wrappers
Can be used for new pipeline construction
Can be used for pipeline rehabilitation/reconditionin
Used in the oil, gas and water pipeline industry
Offshore and Refinery coatings
Functionality to a Coating System
High adhesion strength
High shear resistance and shear strength
Cathodic disbonding resistance
Dielectric strength and electrical resistance
Resistance to impact and penetration forces and stresses
Stable to thermal and hydrolytic environments
Long term performance stability
Compatible with cathodic protection
Resistant to UV radiation
Mechanical protection
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than one full 20 ft container.
A: Low MOQ, 1pc for sample checking is available
A: We usually ship by TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
A: Firstly let us know your thickness or the total coating thickness
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.We can print your logo on the carton or the inner core.
A: Yes, we offer 1-3 years warranty to our products according to the different products
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less
than 0.2%.
Secondly, during the guarantee period, we can replace it with your new order together , but we have to get some proof to supply to our directorate
Contact Person: Ms. Daisy Kong
Tel: 86-15265879789
Fax: 86-537-2599926
