Payment & Shipping Terms:
|Material:||PE||Adhesive Side:||Single Sided|
|Adhesive:||Rubber, Butyl Rubber||Adhesive Type:||Pressure Sensitive|
|Design Printing:||No Printing||Color:||White,Gray,Yellow|
|Backing:||Polyethylene As Basic Material||Type:||Roll|
|Thickness:||0.38 Mm To 1.0 Mm||Width:||50 Mm To 800 Mm|
|Length:||100,200,400,800 Ft||Application:||Corrosion Protection For Gas,oil And Water Pipeline|
|Standard:||DIN EN 12068||Certificate:||ISO 9001,ISO 14001,ISO 18000|
polyethylene film tape
Self adhesive Mechanical tape
The XUNDA-T200 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines. The outer-layer tape backing shall be compounded so that it will be resistance to outdoor weathering.
The outer-layer tape shall be applied after the inner-layer tape by hand or with a wrapping machine
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Film backingr: Special blend of stabilized polyethylene
Excellent adhesion to inner-layer tape and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
|Tape thickness||0.508mm,0.635mm,0.75mm or others|
|Width||50mm,100mm,150mm,225mm or others|
|Length||30m,60m,120m,180m or others|
|Color||Black , Yellow ,White or others|
|Peel Adhesion to Primed Steel||30N/cm|
|Peel Adhesion to Itself||5N/cm|
|Water Vapor Transmission Rate||0.2g/m224h|
|Water Absorptivity||0.1% max|
For Application/ For Service
|5℃ -50℃/-30℃ - 85℃|
Physical Properties:please contact us for getting it.
Oil, Gas and Water Transmission pipeline market
Oil and Gas distribution and utility markets
New pipeline construction markets
Rehabilitation and Reconditioning market
Refinery and Petrochemical Plant Industry
Manufacture of Polyethylene coatings utilizing Butyl based elastomeric adhesives,
Polyethylene films and liquid adhesives for corrosion protection of steel pipe.
Provides corrosion protection with the inherent chemistry of Polyethylene and Butyl
Adhesive for resistance to water and oxygen penetration. Oxygen and Water are prevented
from reaching the metal substrate, which are necessary and sufficient conditions for corrosion.
Manufacture of conventional and specialty Polyethylene, Polypropylene and Polymeric Alloys and
coating systems for pipe corrosion protection.
Manufactures PE coatings systems for applications for New Pipe Construction and
Rehabilitation and Reconditioning
Approved to ISO 9001 and to other good manufacturing and technical standards and norms
governed within the energy and pipeline industry.
Coating systems that have a broad range of temperature and shear resistance properties
to meet the requirements of the pipeline and end-user.
Contact Person: Ms. Daisy Kong