Product Details:
Payment & Shipping Terms:
|
| Film Backing: | Polyethylene | Adhesive: | Butyl Rubebr |
|---|---|---|---|
| Thickness: | 20mil To 40mil | Width: | 18'' |
| Length: | 800ft | Peel Adhesion: | 25N/cm |
| Usage: | Corrosion Protection For Steel Pipes | Color: | Black,yellow,white |
| Standards: | ASTM D1000,EN12068,AWWAC 209&219 | ||
| High Light: | pipe wrap tape for underground,pipe protection tape |
||
Jumbo rolls Pipe Wrapping Coating Material Anti Corrosive Tape Rustproofing Products High Performance
1. Jumbo roll pipe anti corrosion wrap tape system description:
The XUNDA pipe anti-corrosion inner tape is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines.
The Jumbo roll pipe anti corrosion wrap tape shall be applied after the Liquid adhesive and before the outer-layer tape by hand or with a wrapping machine
2. Jumbo roll pipe anti corrosion wrap tapesystem structure:
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: Butyl rubber
Film backing: Special blend of stabilized polyethylene
3. Jumbo roll pipe anti corrosion wrap tape system features:
Excellent adhesion to pipe and self
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
Cold applied
4.Jumbo roll pipe anti corrosion wrap tape system physical properties
|
Item&Standard |
T-150 |
T-165 |
T-175 |
|
Total thickness(ASTM D 1000) |
0.510 mm |
0.635 mm |
0.762 mm |
|
Backing thickness(ASTM D 1000) |
0.310 mm |
0.335 mm |
0.390 mm |
|
Adhesive thickness(ASTM D 1000) |
0.200 mm |
0.300 mm |
0.372 mm |
|
Elongation at Break(ASTM D 1000) |
³ 400% |
||
|
Tensile Strength(ASTM D 1000) |
55 N/cm |
60 N/cm |
63 N/cm |
|
Yield Strength(ASTM D 1000) |
40 N/cm |
45 N/cm |
50 N/cm |
|
Peel Adhesion to Primed Steel Pipe(ASTM D 1000) |
25 N/cm |
30 N/cm |
32 N/cm |
|
Dielectric Strength(ASTM D 1000/D 149) |
35 KV |
42 KV |
45 KV |
|
Cathodic Disbandment (ASTM G8) |
0.24 in radius 6.4 mm |
||
|
Volume Resistivity(ASTM D 257) |
2.5 x 1012 ohm.m |
||
|
Water Vapor Transmission Rate (ASTM F1249) |
£ 0.1gm/M2/24h |
||
|
Water Absorption Rate(ASTM D 570) |
< 0.10% |
||
|
Recommended Application Temperature |
-5 to +60℃ |
||
|
Max Serve Temperature |
-40 to + 85℃ |
||
|
Color |
Black |
||
|
Available Roll Size (width x length) |
2" to 32" X 50’ to 800’ |
||
Contact Person: Ms. Daisy Kong
Tel: 86-15265879789
Fax: 86-537-2599926
