Product Details:
Payment & Shipping Terms:
|
International Standard: | ASTM D ASTM F149,AWWA C 214,EN 12068 | Color: | Black At Most |
---|---|---|---|
Thickness: | 0.30 Mm To 3.0 Mm | Width: | 50 Mm To 800 Mm |
Length: | 10 M To 300 M | Main Market: | Middle East, Southeast Asia And So On |
High Light: | pipe wrap insulation tape,pipe fitting tape |
PE 150mm Width Pipe Corrosion Protection Tape Inner Wrapping Tape
Black color PE 150 mm width Pipe anti Corrosive protection inner wrapping tape is tape-shaped anticorrosion material made of Polyethylene film heat laminated with adhesive layer of butyl glue.
Black color PE 150 mm width Pipe anti Corrosive protection inner wrapping tape Usage: It is extensively used in the pipework of oil and natural gas transportation, petrochemical industry, electric power, metallurgy, urban natural gas network of pipes, the outside anticorrosion project of the metal pipes involved as well as the outside anticorrosion project of the underground and overhead metallic conduit of the works of petrochemical industry, natural gas and coal transportation
Thickness: 0.30 - 3.0mm
Width: 50, 75, 100, 150, 230, 300mm
Length: 10 - 300m
Features:
Excellent adhesion to pipe and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D1000 Standard
Cold applied
Black color PE 150 mm width Pipe anti Corrosive protection inner wrapping tape Technical data:
Order |
Item |
Unit |
Test Value |
|
1 |
Color |
Black ot white |
||
2 |
Total thickness |
mil |
20 |
|
3 |
Tensile Strength |
N/cm |
≥50 width |
|
4 |
Elongation |
% |
≥300 |
|
5 |
Tear Strength |
N/cm |
≥30 |
|
6 |
Peel Adhesion |
To Tape |
N/cm |
≥30 |
To prepared steel |
≥25 |
|||
7 |
Dielectric Strength |
kv/mm |
≥40 |
|
8 |
Volume Resistivity |
Ω.m |
≥1x1012 |
|
9 |
Water Vapor Transmission Rate (24h) |
g/m2 |
≤0.1 |
|
10 |
UV Resistance 600h |
% |
≥80 |
Black color PE 150 mm width Pipe anti Corrosive protection inner wrapping tape Application:
Prepare surfaces by removing all loose scale, rust or other foreign matter by grit blasting or wire brush. Surface must be clean, dry and free of grease. Apply thin film of Butyl Primer to all surfaces to be wrapped and allow to dry. Peel back interleaving and apply adhesive side of the tape to the surface and press down. Apply the tape spirally with enough tension to make it conform. Remove interleaving as wrapping proceeds. Overlap each turn by at least 1" or 55% to achieve double thickness.
Would you like to know more details about us? Please visit www.pipelinewraptape.com
If you need the Black color PE 150 mm width Pipe anti Corrosive protection inner wrapping tape . XUNDA is your best choice
Contact Person: Ms. Daisy Kong
Tel: 86-15265879789
Fax: 86-537-2599926