About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsPipe Wrap Tape

Black Color Polyethylene Anti Corrosion Tape Extrusion 25Mils*4 Inch*100ft

Good quality Pipeline Anti Corrosion Tape for sales
Good quality Pipeline Anti Corrosion Tape for sales
To Whom It May Concern: Concern This is to certify that we have purchased XUNDA PETROLEUM TAPE AND MT TAPE through “Jining Xunda Pipe Coating Materials Co.,Ltd” for our Malaysia marine pipeline project in Dec.2015 and always they are very much impressed about timely delivery of the goods for which we are really pleased and recommend their products

—— Nguyen Ngoc Cu

It is hereby confirm and certify that we, KHAJAH SPECIALTIES COMPANY . having our registered address at Kuwait, have been using Coating Material type T100-165, T-265, MT-1100, P-19, PP-27 manufactured by you since 2012 and there is no problem so far. We are very much satisfied with above products and their good performance of services.

—— Sushil

To Whome it may concern, We have been using Tape manufactured by you since 2012 After the operation of 3 years, we found that the performance of this Tape is very good, and there is no major failure of this Tape and it is so effective in our system. In the meanwhile, after-sales service is so good. So we are very satisfied with your Tape .

—— Нефтегазстром

A quien le interese, Hemos estado utilizando diferentes tipos de materiales de recubrimiento como cinta de envoltura para tubos Xunda, cinta de aluminio, cinta de polietileno, cinta marina, fabricados y suministrados por M / s JINING XUNDA PIPE MATERIALS CO., LTD., Que son fabricantes oficiales de material de recubrimiento. utiliza sus productos en

—— Gustavo

This is to certify that we have been using different types Coating Materials like Xunda pipe wrap tape, Bitumen tape, Polyethylene tape, Marine tape,manufactured & supplied by M/s JINING XUNDA PIPE COATING MATERIALS CO.,LTD., who are official manufacturer of Coating Material having factories at Add- Add: Chenguang Road, Jining City Shandong.


I'm Online Chat Now

Black Color Polyethylene Anti Corrosion Tape Extrusion 25Mils*4 Inch*100ft

China Black Color Polyethylene Anti Corrosion Tape Extrusion 25Mils*4 Inch*100ft supplier
Black Color Polyethylene Anti Corrosion Tape Extrusion 25Mils*4 Inch*100ft supplier Black Color Polyethylene Anti Corrosion Tape Extrusion 25Mils*4 Inch*100ft supplier Black Color Polyethylene Anti Corrosion Tape Extrusion 25Mils*4 Inch*100ft supplier Black Color Polyethylene Anti Corrosion Tape Extrusion 25Mils*4 Inch*100ft supplier Black Color Polyethylene Anti Corrosion Tape Extrusion 25Mils*4 Inch*100ft supplier

Large Image :  Black Color Polyethylene Anti Corrosion Tape Extrusion 25Mils*4 Inch*100ft

Product Details:

Place of Origin: the People's Republic of China (PRC)
Certification: ISO 9001,ISO 14001,OHSAS18001 ,SGS test report,EXOVA test report ,DVGW test report
Model Number: T 100 T 200 T 300

Payment & Shipping Terms:

Minimum Order Quantity: 100 KG
Packaging Details: 310X310X320 MM
Delivery Time: 7-15 DAYS
Payment Terms: T/T,L/C,D/P,Cash
Supply Ability: 15 TONS PER DAY
Contact Now
Detailed Product Description
COLOR: Black, Yellow, White, Gray THICKNESS: 12 MILS TO 80 MILS
Adheisve: Butyl Rubber Backing Film: HDPE/LDPE
High Light:

pipe wrap insulation tape


pipe fitting tape

Black polyethylene butyl rubber tape extrusion 12 mils X 4inchX100ft-inner tape
ⅠSystem description:
The XUNDA-T-100 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines.
The Polyethylene butyl rubber tape extrusion shall be applied after the Liquid adhesive and before the outer-layer tape by hand or with a wrapping machine
ⅡStructure-Polyethylene butyl rubber tape extrusion:
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: Butyl rubber
Film backing: Special blend of stabilized polyethylene
 Black Color Polyethylene Anti Corrosion Tape Extrusion 25Mils*4 Inch*100ft
Ⅲ Features-Polyethylene butyl rubber tape extrusion:
Excellent adhesion to pipe and self
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness              
Easily applied with no special equipment
Compatible with common pipe coatings              
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
Cold applied
Ⅳ Physical Properties-Polyethylene butyl rubber tape extrusion
 Polythene Butyl rubber tape (inner layer/inner wrap ,inner wrapping )

Item T-150

Typical Value

Test Method

Total thickness


ASTMD 1000

Polyethylene Film


ASTMD 1000

Synthetic Adhesive


ASTMD 1000

Elongation at Break³


ASTMD 1000

Tensile Strength

60 N/cm

ASTMD 1000

Yield Strength

42.3 N/cm

ASTMD 1000

Peel Adhesion to Primed Pipe

30 N/cm

ASTMD 1000

Dielectric Strength

45.8 KV/mm


Cathodic Disbandment

0.24 in radius 6.4 mm


Volume Resistivity

2.5 x 1012 ohm.m


Water Vapor Transmission Rate   £


ASTM F 1249

Water Absorption Rate

< 0.10%


Recommended Application Temperature       

-10℃to 60℃


Max Serve Temperature                  

-40 to 80℃





Available Roll Size (width x length)   

2" to 32" X 50’ to 800’


Quality Contorl
In order to provide high quality products and establish a quality outlook with customers and market as guidance, our company took the lead in passing the ISO9000 quality management system certification in anticorrosive industry. And then our company succeeded in the transformation from ISO9000 quality management system certification to 2000 edition. Then our company passed the ISO14001 environmental management system certification and OHSMS 18001 Health and Safety Management System. Passing these international standards and establishing corresponding management system have provided our company a sound security to manufacture products that conform to international or professional standards.
Measures and contents:
1. Purchase of raw materials: To organize concerned personnel to select, assess and control suppliers of raw materials. Purchasing agents shall select qualified suppliers of corresponding raw materials according to the List of Qualified Suppliers and purchase raw materials in strict accordance with Technical Procurement Standards.
2. Factory-in inspection: Raw material inspectors are responsible for testing each item in accordance with the testing standards for raw materials; conducting sampling test to each type of product for materials of different specifications; and randomly choosing 10% of the materials for sampling test. Only qualified raw materials can be accepted for use.
3. In-production inspection: Each procedure shall be tested by the inspectors of the procedure in question. Then professional quality inspectors are responsible for conducting sampling test. In case of any disqualification, carry out strictly the control procedure of disqualified products. The semi-finished products of the previous procedure must meet the qualification requirements before they are admitted into the next procedure. Disqualified semi-finished products must not be used. Quality inspectors are responsible for submitting samples to laboratory for testing each performance indicator.
4. Warehouse-in inspection: Professional quality inspectors are responsible for sampling 10% of the finished products for inspection. In case of any disqualified product, double the samples until they are qualified.
5. Storage: Mark the products of different specifications and dates of prevent any wrong disposal. Equip the warehouse with moisture proof, damp proof and fire-controlling basic facilities to secure a safe and appropriate storage environment.
6. Warehouse-out (Delivery) inspection: End product quality inspectors and warehouse keepers are responsible for check the products’ specification, quantity, production date and quality issues and testing each performance indicator of the products. In case of any disqualified item, the products are deemed to be disqualified. Any disqualified product will not be allowed for delivery.
All the measures concerning purchase of raw materials, factory-in inspection, in-production inspection,
warehouse-in inspection, storage, and warehouse-out (delivery) inspection will prevent disqualified products from entering the markets. In the meantime, the complete and perfect after-sales service and tracking system will secure the wide application of the anticorrosive products manufactured by our company in petroleum and gas pipelines. 
Black Color Polyethylene Anti Corrosion Tape Extrusion 25Mils*4 Inch*100ft

Q What’s the production leading time?

A Usually 8-12 workdays after deposit payment

Q What’s the MOQ?

A It is depends items,usually 500 rolls

Q Do you have any local agent or warehouse in foreign?

A Yes,we have branch in Ukraine,India,Ecuador and so on.

Q What about the package?

A Usually with pallet,OEM customer logo accept

Q How can I visit your factory?

A You are warmly welcome to our factory,just contact us in advance

Our factory detail address is Jining city, Shandong province,China,located in JIning

Airport,half an hour away from Jining Qufu Airport,one hour away from Qufu Dong Railway Station.

Contact Details
Jining Xunda Pipe Coating Materials Co., Ltd.

Contact Person: Ms. Daisy Kong

Tel: 86-15265879789

Fax: 86-537-2599926

Send your inquiry directly to us (0 / 3000)